Try these: Elbow , DWV, Tee, Kraloy

PVC Flue Gas Venting

System 636 PVC is classified as Type BH Class IIA vent, suitable for use on appliances with flue gas temperatures up to and including 65ºC. Pipe and fittings in 2” and 3” size cover most residential gas furnace and power vent water heater installations.

Pipe

Available in 2" and 3" size to accommodate most residential and light commercial installations.

VIEW DETAILS

Cement and Primer

As part of the System 636 flue gas vent system, these low VOC cements and primers must be used to ensure a certified installation.

View Details

Condensate Drain Kit

The Condensate Drain kit is designed to be used with a Tee in the exhaust vent line to drain condensate collecting in the pipe.

VIEW DETAILS

Couplings

Couplings join two pieces of the same type of pipe. Increasers are used to connect a smaller diameter pipe to a larger one.

VIEW DETAILS

Pipe

Available in 2" and 3" size to accommodate most residential and light commercial installations.

VIEW DETAILS

Cement and Primer

As part of the System 636 flue gas vent system, these low VOC cements and primers must be used to ensure a certified installation.

View Details

Condensate Drain Kit

The Condensate Drain kit is designed to be used with a Tee in the exhaust vent line to drain condensate collecting in the pipe.

VIEW DETAILS

Couplings

Couplings join two pieces of the same type of pipe. Increasers are used to connect a smaller diameter pipe to a larger one.

VIEW DETAILS

Elbows

Used to change the direction of a pipe run. The 90° long-radius elbow reduces the restriction on airflow in the vent pipe.

VIEW DETAILS

Tees

Most commonly used in the exhaust vent pipe to collect condensate and direct it to a drain e.g. using a condensate drain kit.

VIEW DETAILS

Termination Vent Screens

Vent screens are added to the hub end of elbows used to terminate exhaust and intake pipe runs on the outside wall of a building.

VIEW DETAILS

Elbows

Used to change the direction of a pipe run. The 90° long-radius elbow reduces the restriction on airflow in the vent pipe.

VIEW DETAILS

Tees

Most commonly used in the exhaust vent pipe to collect condensate and direct it to a drain e.g. using a condensate drain kit.

VIEW DETAILS

Termination Vent Screens

Vent screens are added to the hub end of elbows used to terminate exhaust and intake pipe runs on the outside wall of a building.

VIEW DETAILS

Make the HomeRite Connection

Where To Buy